Contact Us
TEL: +86-510-88532925
Fax: +86-510-88532125
E-mail: info@wuxixinya.com
Address: D08 Liandong Yougu, Zhangjing, Xibei Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Lint Free Microfiber Cloth material selection and weaving process
Mar 23, 2018

Microfiber has attracted much attention in the current textile industry. This material itself has many advantages. At the same time, its application can effectively improve the quality and added value of the product itself. Next, we mainly introduce the knowledge about the material selection and weaving process of the lint-free microfiber cloth, hoping to help everyone understand the lint-free microfiber cloth more fully.

 

As a representative product in the ultra-fine fiber products, the lint-free microfiber cloth has many characteristics such as dust-free, water-absorption, and detergency. The reason why this fiber cloth has a high cleaning ability is because it has an infinite number of fine hairinesses, an infinite number of specific surface areas and micropores. Therefore, it will have such a powerful capacity for dust, oil removal and decontamination.

 

So, what are the requirements for yarn when producing this type of lint-free microfiber cloth? In fact, when we select the fiber, whether it is natural fiber or synthetic fiber, compared with the short fiber staple fiber, the staple fiber is easy to fall off, will become a source of dust, so it will not generally be used as a raw material for clean cloth. In filaments, due to the low strength of silk, rayon, and acetate yarns, long-term use may result in the formation of fine powdery materials that are not suitable as raw materials for cleansing cloths.

 

In addition, organic conductive fibers have been added to some of the products, which also have the ability to eliminate static electricity and have a wider range of uses. In general, in the production of lint-free microfiber cloths, considering that the fabrics are subjected to sand washing and buffing, and that the bristles mainly act on the weft fibers, the microfibers must be used in the latitudinal direction. With microfibers, fine-denier polyester can also be used to stretch the yarn.

 

At the same time, in order to ensure the performance of the non-ronged microfiber cloth, it is also necessary to strictly control the fineness of the fiber. In general, the surface area of the fiber is inversely proportional to the fineness of the fiber. The finer the fiber, the larger the specific surface area and the stronger the dirt removal ability. In addition, the number of piles and twists of the lint-free microfiber cloth yarn should also be considered.

http://www.wxxymicrofibercloth.com/


Previous: Japan leads the global microfiber cloth market in the high-end market.

Next: Eyeglasses cloth target to whole market.